NEC projection lenses

NEC Viewlight  Sharp laser LCD projection long and short focal lens

NEC Viewlight  Sharp laser LCD projection long and short focal lens
Throw ratio: 0.5:1 0.56:1 0.6:1 0.7:1 0.8:1 0.77-1.42:1 1.1-1.9:1 2.7-4.7:1 4.7-8.0:1
Support NEC projection model: Viewlight NP-P803ULJK NP-P703ULJL NP-P653ULJL NP-PA803UJL NP-PA723UJL
Description
Support NEC Viewlight  Sharp projection model: Viewlight NP-P803ULJK NP-P703ULJL NP-P653ULJL NP-PA803UJL NP-PA723UJL NP-653UJL NP-PA853WJL NP-PA703WJL NP-PA903XJL NP-PA1004UL NP-PA804UL
 


 

Projection mode 0.76 inch LCD with micro mirror array (display aspect ratio 16:10) Resolution*1 1920 × 1200 pixels (WUXGA) Lens Optional electric zoom and focus (NP40ZL, NP41ZL, NP43ZL) Lens movement Motorized lens shift Light source Laser diode Light source life (energy saving mode/standard mode) 20000 hours Luminance*2*3 7000 lumens Contrast*3 (full white: full black) 2500000:1 Image size (projection distance) 50--500 inches Input 1 RGB/combination (D-Sub 15 pin), 2 HDMI type A supporting HDCP (19P, HDMI® connector), 1 DisplayPort (20-pin connector) that supports HDCP, 1 HDBaseT, 1 stereo mini audio Output 1 HDBaseT, 1 stereo mini audio 3D port 1 3D SYNC (DIN 3-pin) Control port 1 control serial port slot (D-Sub 9-pin) Wired LAN port slot 1 RJ-45 port slot (10BASE-T/100BASE-TX) USB port slot 1 type A USB Wired remote control port 1 stereo mini jack Color reproduction 10-bit signal processing (1.07 billion colors) Compatible signal*4 Analog: VGA/SVGA/XGA/XGA+/WXGA/WXGA+/SXGA/SXGA+/UXGA/ Full HD/WUXGA/2K 480i/480p/576i/576p/720p/1080i/1080p Digital: VGA/SVGA/XGA/WXGA/SXGA/WUXGA/2K/WQXGA/4K/480p/720p/1080i/1080p Digital 3D: 720P/1080P in frame packing format, top and bottom format or side-by-side format, and 1080i in side-by-side format Horizontal resolution 540 TV lines: NTSC/PAL/PAL60 300 TV lines: SECAM Scanning rate level: 15 kHz to 100 kHz (RGB: 24 kHz or more) Vertical: 50 Hz to 120 Hz (HDMI: 24 Hz to 120 Hz) Synchronization compatible Separate synchronization Power requirements 200—240 volts, 50/60 Hz AC Input current 4.5A Power Standard mode 613 watts Standby (power saving) ≤0.5W Installation orientation Desktop/front projection, desktop/rear projection, ceiling/front projection, ceiling/rear projection Dimensions 580 mm (width) × 205 mm (height) × 490 mm (depth) (excluding protrusions) Weight 18.2 kg Environmental design Operating environment Operating temperature: 5°C to 40°C, 20% to 80% humidity (no condensation) Storage environment Storage temperature: -10°C to 50°C, 20% to 80% humidity (no condensation) Comply with rules CCC certification, comply with GB4943; GB9254; GB17625.1 *1 Effective pixels exceed 99.99%. *2 This is the brightness value (lumens) when the [Preset] mode is set to [Standard]. If you select any other mode as the [Preset] mode, the brightness value will drop slightly. *3 According to ISO21118 standard: The nominal value represents the average value of the product during mass production, and the lowest value of the product is 80% of the nominal value. *4 Images with a resolution higher or lower than the original resolution of the projector (PA703UL+: 1920 × 1200) will be displayed using Advanced AccuBlend (intelligent compression) technology. *5 PA703UL+ and NP-PA703UL+ are the same model. -These specifications and product designs are subject to change without notice.


NEC Viewlight  Sharp  laser LCD projector 0.8 lens test replaces NP11FL short focal lens
 
NEC Viewlight  Sharp  laser LCD projector 0.6:1 lens evaluation replaces NP44ML

NEC  Viewlight  Sharp laser LCD projector projection ratio 1.1-1.9:1 lens evaluation to replace NP12ZL short focus lens

NEC  Viewlight  Sharp laser LCD projector has a 0.54:1 projection ratio and short-focus lens instead of NP44ML


NEC laser LCD projector plus 0.7:1 lens evaluation to replace NP40ZL short focal lens



NEC LCD laser projector telephoto lens throw ratio 2.9-4.7:1 evaluation instead of NP43ZL



1.投射比:镜头到画面距离除以画面宽度

   Projection ratio: distance from lens to picture divided by picture width

2.9点亮度均匀度:9点平均亮度除以其中的最高亮度

   9 brightness uniformity: 9 points average brightness divided by the highest brightness

3.与标镜9点均匀亮度光衰比例:镜头9点平均亮度除以标镜9点平均亮度

   Light attenuation ratio of uniform brightness at 9 points of the standard mirror: average brightness at 9 points of the lens divided by average brightness at 9 points of the standard mirro
 



CAUTION(注意)
LE DU Lens Unit User’s Manual
(镜头部件 用户手册)
Do not give a shock or excessive load to the projector or the lens components as the projector and lens components contain precision parts.
(因为投影机和镜头部件包含精密零件,所以不要对投影机或镜头部件进行剧烈震动或超负载)
When shipping the projector with the lens,remove the lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused byimproper handling during transportation.
(运输带有镜头的投影机时,运输之前需移除镜头。搬运期间处理不当可能会损坏镜头和镜头位移机制。)
Before removing or installing the lens, be sure to turn off the projecttor, wait until the cooling fans stop, andunplug the power cord.
(移除或安装镜头之前,务必关闭投影机,等待直到冷却风扇停止运转,并拔出电源线。)
Do not touch the lens surface when removing or installing the lens.
(请不要在移除或安装镜头时触及镜头表面。)
Keep fingerpeints, dust or oil off the lens surface. Do not scratching.
(防止指纹、灰尘或油附着到镜头表面。请不要刮伤镜头表面)
Work on a level surface with a soft cloth under it toavoid scratching.
(请在水平面上作业,并在镜头底下铺一块软布以免刮伤。)
When using the lens unit, set the lens shift adjustment to the center of the screen.
(当使用镜头部件时,将镜头位移设定至屏幕中央。)
Adjustment to the lens shift adjustment to the position other than the above can cause the edges of the image to become dark or can cause some shadows.
(将镜头位移调节到上述位置以外的其它位置,可能会使影像边缘变得暗淡或者造成黑影。)
 



 

 
 
 


 

Review

1/3
X
Welcome to LEDU lens
Welcome to the world's largest alternative lenses supplier. We focus on professional projector lenses with a throw ratio of 0.3-9:1. Welcome to leave your contact method and we will contact you as soon as possible.